NuCoder Posted June 21, 2009 Report Share Posted June 21, 2009 I am trying to add a 3 picture's with fade / wipe to the bottom dividion of my HTML page. I have tried using both codes below, but nothing is showing when I open the page using either code. Any input? thank you (I have of course changed the swf name and dimensions to fit) Other code attempted to use: Quote Link to comment Share on other sites More sharing options...
PicnicTutorials Posted June 21, 2009 Report Share Posted June 21, 2009 Can you showcan example of this "fade/wipe"? Quote Link to comment Share on other sites More sharing options...
NuCoder Posted June 21, 2009 Author Report Share Posted June 21, 2009 Hi Eric I am new to Flash and web design all together. Unfortunately I can not add to the forum as the site is not up. However - what I am doing is the following: I am importing 3 images onto the Stage in Flash I am placing them at the bottom of the stage image2 image3 image3 I click on the 1st image - click on Insert - Click on Transform/Transition and Select Transition (at this point I am able to select Fade or Wipe / or apply both options) I repeat this for image 2 & 3 The effect this has is that it wipes the image from left to right - fading as the image closes (I am attempting to actually have the 1st image wipe from left to right and fade into the next image as opposed to all 3 having the same effect at once. I know this will take some tweaking in the time line and the layers). I hope this makes sense. Please let me know if I should clarify. As always - thank you Brian Quote Link to comment Share on other sites More sharing options...
virtual Posted June 22, 2009 Report Share Posted June 22, 2009 Have you tried publishing the html page with the swf file. You can then see if it is showing on that page and possibly use the code from it to insert the swf into your own page. Other point to consider, is the path to your swf file correct? Quote Link to comment Share on other sites More sharing options...
lm Posted June 22, 2009 Report Share Posted June 22, 2009 (edited) Whatever Flash ( .swf ) file you created, it should show when path is correct. So first of all, check if the path to your swf is correct ( use at first full path to .swf in embed code to make sure). Secondly, there a few methods to embed Flash - with their up and down sides. Read about it here and then choose one on you prefer. As for now the most popular - SWF object method as it allows to enter some alternative content. Edited June 22, 2009 by lm Quote Link to comment Share on other sites More sharing options...
NuCoder Posted June 22, 2009 Author Report Share Posted June 22, 2009 Thank you Virtual and LM I will look into this to confirm and will visit the link provided. If I have any questions or am stumped - I will post again. Thank you Brian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.