Sports - Bah Humbug!

But you Canucks Rock in your opening ceremonies! Anyone catch it? Bloody awesome it was... and that from someone in Alaska who watches whales and salmon runs every year... the ice breaking up effect, the killer whales "under water" and the salmon run... Brilliant! I also like the woods and totem poles and the Aurora... I just did not care much for the end when the center piece was a mountain. But the rest was great, not to mention doing it last so the athletes could enjoy it. Well done!

But that was just a feast for the eyes... what I found best were the 1st Nations involvement. For those not in the know, 1st Nations are the major Native American... flavors. They are in turn broken down to the better knows individual tribes.

Just last month I was told the Canadians treat natives worse than US Americans do. I do not pay attention to the Olympics, just watched because my wife and daughter wanted to, so I may be wrong... but I do not think any US Olympics focused so much on the native culture. Once the official gabble was over, representatives of all nations came out and drummed and danced as the athletes were announced. Every thing from the natives closer related to ours in the lower 48 and my own Patawatomie (Great lakes area), as well as those from British Columbia who are closely related to our local Tlingit and Haida in SE Alaska and those from the far north related to the Aleuts (Eskimos). It blew me away that so much was done to represent our native peoples.

It is a shame that this grand show was tainted by the death of an athlete and the failure of one section of the torch to rise. I am afraid the death will mark this Olympics more than the wonderful opening ceremonies.

My only complaint was the French, OK I know, French Canadians and all... but it was in the English section and honestly English as the official languages should have been spoke first. But that is a minor issue considering.

Oh, and you Canadian type people, please accept my apologies for the once more embarrassing, not thought through, brainless comments uttered by our (thankfully) former Governor. Even many of her former followers here in Alaska are just shaking their heads about her comments on Canadian health care... especially as she admitted her family went to Canada for health care when she was a kid. She may have lived here but not all Alaskans like to admit it.

And I can almost throw a rock into Canada from my house!   LOL

I was wonderiong if anyone could tell me the different dimensions I need to make the canvas so that I can get photos printed out at various sizes according to standard paper sizes?

Thank you as always,

Best wishes
Graeme

Cause my LSI seem to get crunched when i zoom out with using the browser.

Am I making sense?

I have a registration page on my website for users to sign up to use the site. It was setup using the insert record form wizard in Dreamweaver cs4 and works fine. What i would like to do is that when the user hits the button to insert the record into the database, they also receive an email with their registration details. I have searched around and have been unable to find a a method of how to achieve this. The only methods i found us ASP and my site is in PHP. Any help or advice would be grealty appreciated,

Thanks,

Peter

If someone could please look at and tell me what I am doing wrong?
Thanks again, I appreciate all the help!!

www.portcharlesharbor.com/practicecss.html
my css:

/* CSS Document */

body {
   
    background-color:#CCCCCC;
    text-align:center;   
    margin: 0;
    padding: 0;
}   
   

#wrapper {
    width:1010px;
    margin:0 auto;
    padding:10px;
}   
   

#top {
    width:1010px;
    height:212px;
    z-index:1;
}   

   
#menu {
    width:1010px;
    height:53px;
   
}   

#bodybase {
   
   
    width:1010px;
    height:633px;
   
}
   
   
#leftcontent{
float: left;
width: 190px;

}

#rightcontent{
float: right;
width: 190px;

}

#maincontent{
margin-right: 190px;
margin-left: 190px;
width: 610px;

}
   

#footer {
   
    float-left;
    width:1010px;
    height:46px;
    z-index:1;
}

   
    .style8 {
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    font-size: 14px;
    color: #FFFFFF;
    line-height:50px;
}   
.style9 {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    line-height:35px;
   
}   
a:link {
    color: #FFFFFF;
    font-weight: bold;
    font-family: Georgia, "Times New Roman", Times, serif;
    text-decoration: none;
}
a:visited {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    text-decoration: none;
}
a:hover {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    text-decoration: none;
}
a:active {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    text-decoration: none;
}

So what is Soholaunch like? I have tried to find some reviews, and didn't get much.
I did find something funny ... on a webhost's forum, someone asked for help with Soholaunch Pro .. and was told by a webhost rep to

Why have a Forum for your customers if you don't use it to help?

Anyways, has anyone used Soholaunch and is it worth learning just for some occasional and minor updates for which I likely won't get paid..?

Anyway, if someone could please help me,
Thank you so much

I have posted my practice page  www.portcharlesharbor.com/practicecss.html
and my css is;

/* CSS Document */

body {
   
    background-color:#CCCCCC;
    text-align:center;   
}   
   

#wrapper {
    width:1010px;
    margin:0 auto;
    padding:10px;
}   
   

#top {
    width:1010px;
    height:212px;
    z-index:1;
}   

   
#menu {
    width:1010px;
    height:53px;
   
}   

#bodybase {
   
   
    width:1010px;
    height:633px;
    z-index:1;
}
   
   
#leftcontent{
float:left;
margin:1em;
width: 8em;;
display:inline;
padding: 0;
}

#rightcontent{
float:right;
margin: 1em;;
width:10em;;
display:inline;
padding: 0;
}

#maincontent{
margin: 1em;
margin-left:10em;
margin-right: 10em;
}
   

#footer {
   
    float-left;
    width:1010px;
    height:46px;
    z-index:1;
}

   
    .style8 {
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    font-size: 14px;
    color: #FFFFFF;
    line-height:50px;
}   
.style9 {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    line-height:35px;
   
}   
a:link {
    color: #FFFFFF;
    font-weight: bold;
    font-family: Georgia, "Times New Roman", Times, serif;
    text-decoration: none;
}
a:visited {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    text-decoration: none;
}
a:hover {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    text-decoration: none;
}
a:active {
    color: #FFFFFF;
    font-family: Georgia, "Times New Roman", Times, serif;
    font-weight: bold;
    text-decoration: none;
}

I administer the site for a local bridge club at w ww.carlton bridge centre.org.uk.  If you view this site, you will notice that it currently uses frames: this is merely to keep the header and menu static (i.e., non-scrolling).

The reason I use frames is that many of the pages (all the Results pages for events) are generated by our scoring program; otherwise, I would use an INCLUDE for the header and menu, and CSS to keep it still!  The Results pages are auto-uploaded by our decidedly non-technical members using an app. called CarbonFTP—to keep everything as simple as possible for them.

Given those constraints, I have two questions:

1) Should I 'go against the flow' and just keep using frames for that site?

2) Is there some way that I could keep the header (and the menu, which incidentally was created using SoThink DHTML Menu if that helps you) non-scrolling WITHOUT using frames, yet still be able to have our auto-generated Results pages easily uploadable by our users?

Apologies if I haven't described those questions very well, or if they are FAQs.  I've had a good look through many HTML 'how-to' sites, but I can't find any answer which would work for pages which are auto-generated by a third-party app.

Please do ask if there's any information I haven't given above which you would need in order to be able to help.

Any and all thoughts or ideas welcome.  Sincere thanks in advance!
--
BFN
CAD

I'm new here and so I hope I'm not breaking any forum rule, because that's not my intent at all.

I'm currently going to build a website that has to web hosting and web design and i want to offer a really cool tool to people that visit the site. Something that is really helpful and that is hard to find free. I don't plan on charging for the tool. I don't mind spending money on buying the master rights to a tool, so I can give it away, I just want something that is 1. helpful and  2. hard to find free (if you can find it free all over the net, me offering it free isn't really that helpful). Anyway, I thought... hummm... who better to ask than a bunch of people who are building web sites what kinds of tools they would love to be able to use free and aren't finding.

Also, i'm not talking things like Dreamweaver, photoshop, and other software, but something more like a logo generator, favicon generator, blah, blah, blah. Obviously the generators I mentioned are easy to find, but you get the idea.

I would love to get any advice or ideas you care to contribute. And heck once I have a winner I'll post it on here and everyone can come use the tool!

Thanks!

Justin

Reason being, it seems I spend more time hacking for IE6 than I would like, I am still not very good at it, and it has only 10% of the browser share and falling??

Jamaican Newton Marshall will be taking part in the 38th Iditarod dog sled race. He has been trainined by the defending Champion Lance Mackey who is so confident in his abilities that he is lending him one of his prized and popular lead dogs “Larry”, the team being lead by Larry will be made up of Mackey’s younger dogs. Here in Alaska as well as Iditarod fans in general, the dogs are as well known and loved as their drivers.

“Marshall took up the sport on a Caribbean island where it never snows. Singer Jimmy Buffett is his main sponsor. In other words, Hollywood might as well start casting the movie now.” - Anchorage Daily News

Now this should be interesting… Keep your eye open for the TV show as well. The last Iditarod was filmed as crews followed the lead names in the race and was shown in weekly segments. There is more to it than you might think.

http://www.adn.com/2009/11/29/1033589/j … tarod.html

http://www.ktuu.com/global/story.asp?s=12067070

http://www.iditarod.com/race/musherprofiles/musherbio_336.htm

www.jamaicadogsled.com

(new article)http://www.northernlightmedia.com/2429/2010-iditarod-larry-newton/

Good Luck to Larry and Newton

PS - This was written to my family before the race started, it has been running almost a week now.

Could anybody help with following cross-language issue?

It would be needed that the same page display text in different languages e.g. there are some introduction in my native latvian using charset=windows-1257, then there are few sentences in russian using charset=windows-1251, then again latvian and so on.

I tried to put charset and lang attributes in different tags (with and without meta charset definition in head), still nothing produced desired results - there are correctly rendered only one language, another being mess of scrawls.

I was suggested utf-8 to be some sort of solution, still there are an other problem - for some unknown reason browsers (at least in our country) often does not render it properly. In our practice only proven charsets rendering 100% correct characters so far is windows-1257 for latvian and windows-1251 for russian.

I would be very thankful for any ideas.

Walc

Create browsing history page of website. When user browse through pages of website at the end user can see which pages he browsed.

Reply required. I will be grateful.

If it can happen can u let me know the examples of it

Thanks
Jyothi

problem : i have downloaded a flash intro (swf + fla)the swf which i downloaded is working so good but when i open the fla file to edit the source and export it to swf i have many errors, even if i didn't edit any thing (just open it in flash then export it again) i have that errors

**Error** Scene=Scene 1, layer=Action Layer, frame=1:Line 1: Function name expected
     function ()

**Error** Scene=Scene 1, layer=Action Layer, frame=1:Line 3: Unexpected '\' encountered
         \x03 = 2008 % 511 * true;

**Error** Scene=Scene 1, layer=Action Layer, frame=1:Line 5: Unexpected '}' encountered
     } // End of the function

**Error** Scene=Scene 1, layer=Action Layer, frame=2:Line 1: Function name expected
     function ()

**Error** Scene=Scene 1, layer=Action Layer, frame=2:Line 3: Unexpected '\' encountered
         \x03 = 990 % 511 * true;

**Error** Scene=Scene 1, layer=Action Layer, frame=2:Line 5: Unexpected '}' encountered
     } // End of the function

**Error** Symbol=sprite 75, layer=Action Layer, frame=1:Line 1: Function name expected
     function ()

**Error** Symbol=sprite 75, layer=Action Layer, frame=1:Line 3: Unexpected '\' encountered
         \x03 = 1086 % 511 * true;

**Error** Symbol=sprite 75, layer=Action Layer, frame=1:Line 5: Unexpected '}' encountered
     } // End of the function

**Error** Symbol=sprite 58, layer=Action Layer, frame=1:Line 1: Function name expected
     function ()

**Error** Symbol=sprite 58, layer=Action Layer, frame=1:Line 3: Unexpected '\' encountered
         \x03 = 2462 % 511 * true;

**Error** Symbol=sprite 58, layer=Action Layer, frame=1:Line 5: Unexpected '}' encountered
     } // End of the function

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 3: Function name expected
         function ()

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 5: Unexpected '\' encountered
             \x03 = 1147 % 511 * true;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 8: Identifier expected
         var \x01 = 364 + \x04\x05();

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 9: Unexpected '\' encountered
         while (\x01 = eval("\x01") + 33, eval("\x01") == 733)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 11: Unexpected '\' encountered
             \x01 = eval("\x01") - 495;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 9: Statement must appear within on handler
         while (\x01 = eval("\x01") + 33, eval("\x01") == 733)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 16: Unexpected '\' encountered
             \x01 = eval("\x01") - 670;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 14: Statement must appear within on handler
         if (eval("\x01") == 942)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 21: Unexpected '\' encountered
             \x01 = eval("\x01") + 467;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 19: Statement must appear within on handler
         if (eval("\x01") == 222)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 26: Unexpected '\' encountered
             \x01 = eval("\x01") + 617;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 24: Statement must appear within on handler
         if (eval("\x01") == 238)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 31: Unexpected '\' encountered
             \x01 = eval("\x01") - 111;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 29: Statement must appear within on handler
         if (eval("\x01") == 800)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 34: Unexpected '\' encountered
         \x01 = eval("\x01") - 543;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 37: Unexpected '\' encountered
             \x01 = eval("\x01") + 367;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 35: Statement must appear within on handler
         if (eval("\x01") == 318)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 42: Unexpected '\' encountered
             \x01 = eval("\x01") + 603;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 48: Unexpected '\' encountered
                 \x01 = eval("\x01") - 495;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 40: Statement must appear within on handler
         if (eval("\x01") == 130)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 54: Unexpected '\' encountered
             \x01 = eval("\x01") + 598;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 52: Statement must appear within on handler
         if (eval("\x01") == 202)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 58: Unexpected '\' encountered
         \x01 = eval("\x01") + 483;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 61: Unexpected '\' encountered
             \x01 = eval("\x01") + 629;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 59: Statement must appear within on handler
         if (eval("\x01") == 289)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 65: Unexpected '\' encountered
         \x01 = eval("\x01") - 559;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 68: Unexpected '\' encountered
             \x01 = eval("\x01") + 247;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 74: Unexpected '\' encountered
                 \x01 = eval("\x01") - 79;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 66: Statement must appear within on handler
         if (eval("\x01") == 522)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 80: Unexpected '\' encountered
             \x01 = eval("\x01") + 647;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 78: Statement must appear within on handler
         if (eval("\x01") == 323)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 85: Unexpected '\' encountered
             \x01 = eval("\x01") + 320;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 83: Statement must appear within on handler
         if (eval("\x01") == 365)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 90: Unexpected '\' encountered
             \x01 = eval("\x01") - 138;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 96: Unexpected '\' encountered
                 \x01 = eval("\x01") + 629;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 88: Statement must appear within on handler
         if (eval("\x01") == 427)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 102: Unexpected '\' encountered
             \x01 = eval("\x01") - 761;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 108: Unexpected '\' encountered
                 \x01 = eval("\x01") + 598;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 100: Statement must appear within on handler
         if (eval("\x01") == 963)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 114: Unexpected '\' encountered
             \x01 = eval("\x01") - 79;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 112: Statement must appear within on handler
         if (eval("\x01") == 769)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 120: Unexpected '\' encountered
             \x01 = eval("\x01") + 714;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 118: Statement must appear within on handler
         if (eval("\x01") == 177)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 125: Unexpected '\' encountered
             \x01 = eval("\x01") + 806;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 123: Statement must appear within on handler
         if (eval("\x01") == 49)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 130: Unexpected '\' encountered
             \x01 = eval("\x01") - 465;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 128: Statement must appear within on handler
         if (eval("\x01") == 680)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 133: Unexpected '\' encountered
         \x01 = eval("\x01") + 507;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 134: Unexpected '\' encountered
         \x01 = eval("\x01") - 780;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 135: Statement must appear within on handler
         var null = !null;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 136: Unexpected '\' encountered
         \x01 = eval("\x01") + 72;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 139: Unexpected '\' encountered
             \x01 = eval("\x01") + 220;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 145: Unexpected '\' encountered
                 \x01 = eval("\x01") - 670;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 137: Statement must appear within on handler
         if (eval("\x01") == 722)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 151: Unexpected '\' encountered
             \x01 = eval("\x01") - 27;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 149: Statement must appear within on handler
         if (eval("\x01") == 918)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 156: Unexpected '\' encountered
             \x01 = eval("\x01") + 66;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 163: Unexpected '\' encountered
                 \x01 = eval("\x01") + 280;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 166: Unexpected '\' encountered
             \x01 = eval("\x01") + 292;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 167: Unexpected '\' encountered
             \x01 = eval("\x01") - 199;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 170: Unexpected '\' encountered
                 \x01 = eval("\x01") + 45;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 176: Unexpected '\' encountered
                     \x01 = eval("\x01") - 336;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 182: Unexpected '\' encountered
                 \x01 = eval("\x01") - 336;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 188: Unexpected '\' encountered
                 \x01 = eval("\x01") - 338;

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 154: Statement must appear within on handler
         if (eval("\x01") == 272)

**Error** Symbol=sprite 42, layer=Layer 3, frame=1:Line 193: Unexpected '}' encountered
     }

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 3: Function name expected
         function ()

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 5: Unexpected '\' encountered
             \x03 = 2219 % 511 * true;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 8: Identifier expected
         var \x01 = 58 + \x04\x05();

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 9: Unexpected '\' encountered
         for (\x01 = eval("\x01") + 265; eval("\x01") == 498; \x01 = eval("\x01") - 492)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 11: Unexpected '\' encountered
             \x01 = eval("\x01") + 115;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 9: Statement must appear within on handler
         for (\x01 = eval("\x01") + 265; eval("\x01") == 498; \x01 = eval("\x01") - 492)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 19: Unexpected '\' encountered
             \x01 = eval("\x01") - 492;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 17: Statement must appear within on handler
         if (eval("\x01") == 613)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 25: Unexpected '\' encountered
             \x01 = eval("\x01") - 577;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 23: Statement must appear within on handler
         if (eval("\x01") == 900)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 30: Unexpected '\' encountered
             \x01 = eval("\x01") - 186;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 28: Statement must appear within on handler
         if (eval("\x01") == 865)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 35: Unexpected '\' encountered
             \x01 = eval("\x01") + 534;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 33: Statement must appear within on handler
         if (eval("\x01") == 121)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 40: Unexpected '\' encountered
             \x01 = eval("\x01") - 111;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 38: Statement must appear within on handler
         if (eval("\x01") == 285)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 45: Unexpected '\' encountered
             \x01 = eval("\x01") + 92;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 43: Statement must appear within on handler
         if (eval("\x01") == 563)

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 48: Unexpected '\' encountered
         \x01 = eval("\x01") + 14;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 51: Unexpected '\' encountered
             \x01 = eval("\x01") - 298;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 58: Unexpected '\' encountered
                 \x01 = eval("\x01") + 638;

**Error** Symbol=sprite 45, layer=Layer 2, frame=1:Line 64: Unexpected '\' encountered
                     \x01 = eval("\x01") - 577;

Total ActionScript Errors: 3104      Reported Errors: 100

in addition to, after all these errors the exported swf file just keep working again and again without a stop at end......so what is the problem?

Plz help